24 products in the directory
OpenLOCK Crossbow Ammunition Tracker This product is for a set of digital STLs file for use with your 3D printer. Included with the STLs is a readme detailing printer settings to achieve the picture in the below. YMMV.
Game Tokens:Ammo STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Arcade Coin STLThis product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV. \
Game Tokens: Atom STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Carrot STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Caterpillar STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Chaos STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Explosion STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Fan STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Fly STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens:Gas Can STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Illuminati Symbol STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder This token also has a special feature. This model comes in three pieces with the illuminati symbol being separate from the other peice. Once assembled the...
Game Tokens: Launch Button STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Liberty 20 Dollar Coin STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Liberty One Cent STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Bullet Hole Liberty Dollar STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the picture below. YMMV.
Game Tokens: Liberty One Dollar STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These tokens are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Net STL. This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Padlock STL. This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Pencil STL This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Power Port STL. This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Screw STL. This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
Game Tokens: Tools STL. This product is for a digital STL file for use with your 3D printer. The default size is 31.75mm by 6.35mm and the back is blank. These bennies are designed to fit into the Name Tent Plus which you can purchase here: https://www.drivethrurpg.com/product/318808/Name-Tent-Plus-Benny-and-Card-Holder Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV.
This product is for digital STL files for use with your 3D printer. Included are STLs for a modular bridge that can be expanded and length and width using OpenLOCK connectors. Included with the STL is a readme detailing printer settings to achieve the picture in the thumbnail. YMMV. www.printablescenery.com